This inflatable aircraft hangar is designed for commercial aircraft maintenance, inspection, temporary storage and aviation projects that require large clear-span covered space without constructing a permanent hangar.

The sealed inflatable air rib structure creates a high-clearance interior for aircraft, maintenance personnel, work platforms and ground support equipment. Hangar dimensions and entrance clearance can be customized according to the aircraft model, wingspan, fuselage length, tail height and required maintenance space.

Sealed Air Rib Hangar Structure
密封空气肋形仓库结构

The main supporting structure consists of multiple sealed inflatable air ribs forming a large arched enclosure.

During installation, the air ribs are inflated to the specified working pressure. Under normal operating conditions, continuous blower operation is not required.

Periodic pressure checks and supplementary inflation may be necessary because of temperature changes, long-term air permeability and operating conditions.

This design provides a large enclosed aviation workspace while avoiding conventional columns in the central aircraft area.

Designed Around the Aircraft

Aircraft hangar dimensions should not be selected only from a standard external size.

For commercial aviation projects, the configuration should be based on:

• Aircraft model
• Wingspan
• Overall aircraft length
• Tail height
• Engine clearance
• Aircraft towing route
• Ground support equipment
• Maintenance platforms
• Required working clearance

Buyers can provide an aircraft model or dimensional drawing so the required internal span, height and entrance size can be evaluated.

Clear-Span Space for Aircraft Maintenance
用于飞机维修的透明空间

Maintenance teams require sufficient working space around the aircraft rather than simply enough room to park it.

The clear-span interior can accommodate:

• Aircraft inspection
• Scheduled maintenance
• Temporary MRO operations
• Engine and component work
• Maintenance platforms
• Mobile work equipment
• Tools and spare parts
• Ground support equipment
• Aircraft service vehicles

Additional clearance should be considered around the wings, engines, fuselage and tail according to the planned maintenance activity.

Large Aircraft Entrance

Entrance dimensions are one of the most important requirements for an aircraft hangar.

The opening should be evaluated according to:

• Aircraft wingspan
• Tail height
• Engine position
• Aircraft towing clearance
• Ground equipment
• Required safety clearance

Front and rear configurations can be customized according to the aircraft movement route and site conditions.

For large commercial aircraft, the complete aircraft dimensional information should be confirmed before production.

Temporary Aircraft Maintenance and Storage

The structure can provide additional aviation capacity when permanent hangar space is unavailable or when the requirement is project-based.

Typical applications include:

• Commercial aircraft maintenance
• Temporary MRO facilities
• Aircraft inspection
• Aircraft storage
• Airport capacity expansion
• Seasonal maintenance programs
• Aircraft assembly support
• Ground support equipment storage

Depending on the final configuration and site conditions, the hangar can also be planned for dismantling and reuse.

Custom Hangar Configuration

Each aircraft project has different clearance and operational requirements.

Customization can include:

• Overall width
• Overall length
• Internal height
• Clear span
• Air rib configuration
• Aircraft entrance width and height
• Front and rear enclosure
• Personnel access
• Service equipment access
• Fabric specification
• Anchoring arrangement
• Exterior color
• Logo or project identification

The final configuration should be based on the actual aircraft, maintenance activity and installation environment.

Site and Engineering Requirements

Large aviation shelters should be evaluated according to the actual installation site.

Important information includes:

• Available installation area
• Ground or foundation conditions
• Aircraft movement route
• Anchoring locations
• Local maximum wind conditions
• Snow load requirements, if applicable
• Operating temperature
• Expected installation period
• Local project requirements

The structural configuration and anchoring system should be confirmed according to the project location and engineering requirements.

Information Required for a Custom Quotation

Please provide the following information for project evaluation:

1. Aircraft Model
Aircraft type and model number if available.

2. Aircraft Dimensions
Wingspan, overall length and tail height.

3. Required Hangar Size
Preferred width × length × internal height.

4. Maintenance Application
Storage, inspection, scheduled maintenance, MRO or other aviation use.

5. Working Clearance
Required space around the wings, engines, fuselage and tail.

6. Entrance Requirements
Required aircraft access width and height.

7. Ground Support Equipment
Aircraft tug, maintenance vehicles, platforms or other equipment.

8. Installation Location
Country, city and airport/project environment.

9. Ground Conditions
Concrete, asphalt or other installation surface.

10. Local Environmental Conditions
Maximum wind speed, snow load and operating temperature if applicable.

Providing aircraft drawings and basic site plans can help with preliminary hangar configuration.

FAQ

What is an inflatable aircraft hangar?

An inflatable aircraft hangar is a large air-rib structure designed to provide clear-span covered space for aircraft maintenance, inspection, storage and temporary aviation operations.

Can it accommodate commercial aircraft?

Yes. The hangar can be customized according to the aircraft wingspan, length, tail height, entrance clearance and maintenance requirements.

Does the hangar require a continuous blower?

No. The sealed air ribs are inflated to the specified working pressure and normally do not require continuous blower operation. Periodic pressure inspection and supplementary inflation may still be required.

Can it be used for aircraft maintenance?

Yes. The internal layout can be developed for aircraft inspection, scheduled maintenance, temporary MRO activities, work platforms and ground support equipment.

Can the aircraft entrance be customized?

Yes. Entrance width and height can be designed according to the aircraft profile, towing route and required operating clearance.

Can it be used as a temporary airport hangar?

Yes. It can provide temporary or supplementary hangar capacity for maintenance, storage and project-based aviation operations.

Can the hangar be dismantled and reused?

Depending on the final configuration and installation conditions, the structure can be planned for dismantling and reuse. Each new installation site should be evaluated before reinstallation.

What information is required for quotation?

Please provide the aircraft model, wingspan, length, tail height, maintenance application, required working clearance, entrance dimensions, installation location and site conditions.

Custom Aircraft Maintenance Hangar for Your Project
为您的项目量身定制的飞机维修库

For commercial aircraft maintenance, storage or temporary MRO projects, the hangar should be developed around the aircraft rather than around a fixed standard shelter size.

Send us your aircraft model or dimensions, maintenance application, required clearance and installation location, and we can evaluate a suitable inflatable air rib aircraft hangar configuration.